5-inch Racing Drone VTX/RX Mounts
The 5-inch racing drone VTX/RX Mounts are made from one of the more rigid TPU materials to provide more support, yet flexibility, to hold up in crashes. These solutions are believed to provide the best orientation of antennae angles and are proven in our field testing.
The Out and Up (OU) VTX/RX Mount has one RX antenna straight up and the other one straight out ( 90 degrees from the up). The Video Transmitter (VTX) antenna is mounted at 45 degrees.
The other solution we offer comes in two pieces. The VTX Antenna Mount (VAM) is just like the OU without the integrated RX mounting tubes. It mounts the VTX at a 45 degree off the aft of the drone as well. The other piece is the Stack RX Antenna Mount (SRAM) which mounts the RX off the stack and in-between the arms of the drone. We can dial up the angle, referenced to each RX tube, to allow adjustment on the different frames. The allows is to position the antenna as close to the center of the arms as possible. We’ve found this to give the best performance in our field testing.
The VTX/RX mounts weigh in at ~6.5 grams on average, depending on the frame at 100% in-fill.
The OU will provide the farthest down range performance and the VAM/SRAM will perform the best during races and crashes.
The STLs are available for $3.95 each OR the print shop in Sheboygan can print either solution for you at $13.50 each; which doesn’t include shipping. For clarity, that means one OU part OR a VAM + SRAM.
The print shop has limited colors on hand, but we are offering green, orange and black initially. As demand grows, we will offer more colors.
Feel free to contact us at email@example.com, if you are interested. Thanks for checking it out !