5-inch Racing Drone Stack and Universal Shelfs

The 5-inch Racing Drone Stack and Universal Shelfs are made from a more rigid, yet flexible, TPU material.

These shelves help organize your components as well as provide needed separation to minimize heat and RF interference. Typically, components are sandwiched on top of one another using double-sided tape and a tie wrap. This approach is problematic and we felt we could do better.

The stack shelf is a fairly standard size. We’ve used the aft shelf in varying fin height, width and spacing depending on the frame. The photos below show one version of a 7mm high by 2mm wide fins (TBS unify taped to frame for heat dissipation and then a XSR on the shelf).

We can programmatically change many variables in our shelf designs to customize them for a given frame.

The parts weigh in, on average, less than 1.5 grams each.

The STLs are available for $3.95 each OR the print shop in Sheboygan can print 2 pieces (you choose which ones) for $4.95; which doesn’t include shipping.

The print shop has limited colors on hand, but we are offering green, orange and black initially.  As demand grows, we will offer more colors.

Feel free to contact us at greenbaydrl@gmail.com, if you are interested.  Thanks for checking it out !

Universal shelf render (2mm fins, 7mm high)

Universal shelf render (2mm fins, 7mm high)

Universal shelf in green used in Alien left view

Universal shelf in green used in Alien left view

Universal shelf in green used in Alien aft

Universal shelf in green used in Alien aft

Stack shelf top render

Stack shelf top render

Leggero stack shelf in red

Leggero stack shelf in red

Leggero red stack shelf with XSR mounted

Leggero red stack shelf with XSR mounted

Fury blue stack shelf

Fury blue stack shelf

Fury blue stack shelf with XSR mounted

Fury blue stack shelf with XSR mounted